Posting to the Technique Forum
Here are several general recommendations when posting questions to the technique forum. I have interspersed some of TomC's comments from the other sticky, because he is also a platform coach but as an added bonus, is also a photographer, which I am not:
1) Post a video. Really, sometimes we have to say this.
- If you film the exercise in portrait mode, find a way to rotate it so that people don't have to turn their heads to the side. If you don't have time to figure out how to rotate it, you don't have time to post the video. Others have figured this out. So can you.
- Use support for your camera. A tripod is the gold standard. If not, a chair, a box, or a stack of plates works nicely. If it is handheld, try to lean against something, or sit down and brace your arm. Watching shaky footage needlessly inflicts pain on your viewers.
- Learn to use video editing software. There is basic stuff out there for free that will do what you need. Windows Movie Maker and iMovie come to mind. If you have a minute of you setting up the camera and getting psyched for a lift, you are wasting everyone's time. Clip out most of the stuff in the beginning so that we can see the lifts.
- Better quality footage results in easier diagnosis. It is 2010 and if you want free coaching from anonymous people on the Internet, borrow your friend's camera instead of using a four year old cell phone. It will make everyone involved happier. (More importantly, it will make TomC and/or me happier, which is all that matters. Your happiness depends on our happiness, so for your own safety, make us happy. - Steve in ATL)
2) Post your last working set. We want to see you at your tired worst. That means the tape should show 5 reps - 3 for cleans. At your working weight. Don't post a "light weight" because you were "working on your technique." Please don't post sets of 6/9/12 reps - you shouldn't be doing them, so we don't want to look at them.
3) Don't wear black or other really dark colors - it's hard to see some of the landmarks that we're looking for. Grey is usually good.
4) Get as much light as possible on you. Let me repeat: You are not using enough light. USE MORE.
5) Show your set-up, and include all of you in the frame. Sometimes we want to see where you're putting your feet / hands / head.
6) If it is a follow-up video, post a link to your previous technique thread.
For each of the lifts, here are some additional recommendations:
1) From the front / rear quarter, at eye level is usually the best, but sometimes from the side will be necessary. We will tell you when this is so.
TomC: Position the camera at roughly hip height at a 45-degree angle from whoever is exercising. Videos from the side and back or front have their uses, but if you can only post one video, please choose a 45. This keeps the plates out of the way and allows us to see all of the joints and what they are doing. No angle is perfect and shows everything, but the 45s are a nice compromise.
- Take away note: Neither TomC nor I like films from floor level. We will deride you.
2) Try to keep obstructions to a minimum.
3) Put the camera at what would be eye level, just like we were there with you. Don't put the camera 6" off the ground, or we will have you fucking killed.
4) Since you're doing 3 sets, try to take one set from the front quarter, from the rear quarter, and then your last set from the side. That way you have the other two angles if needed.
5) KEEP YOUR HEAD DOWN. 95% of you will make this very basic mistake. I guarantee it.
1) Show your set-up. Show your set-up. SHOW YOUR FUCKING SET-UP.
2) Best if filmed from the side or the front quarter. We need to see where you put your feet / hands / knees, and this can be done from a high side-shot.
TomC: Make sure that your head and feet are in the frame at all times. This means you may have to back up a good way from whoever is lifting.
3) We need to see the entire bar path. That means we need to see the close end of the bar for the entire range of the rep.
4) Show your set-up.
1) Shot best from the front quarter. Need to be able to see the lockout position, and the entire body at least from the knees up.
1) Usually shot best from above the head of the lifter looking down at a 45 degree angle (from where the spotter would stand), although from the side is good as long as we can see where the bar touches the chest, as well as the end of the bar.
1) From the front quarter is almost always best because we need to see set-up, but the side is good too as long as the camera is far enough back. See rule #1 on the deadlift.
2) Make sure you show the end of the bar for the entire bar path or we will have you killed.
Last edited by Steve Hill; 10-07-2011 at 12:54 PM.
Reason: Make it more better
How to link to a specific time in a youtube video:
If you want to link to the 3 minute, 8 second mark, just add this to the end of the video URL:
If you embed the video, add the link below it. The embed doesn't seem to be viewable on all mobile devices.
Last edited by Clay Simczyk; 05-10-2013 at 01:54 PM.
This is work-aroundable. Top of thread, thread tools, printable version. The embedded link magically appears.
Originally Posted by clembeeblebrox
But still, everyone, yes: post the damned link.
Since most videos submitted here are mainly YouTube videos, I thought it's worth sharing this quick trim/edit technique. YouTube has been allowing quick trim capability for a while now. Here's the quick tutorial.
1. Upload Video on YouTube.
2. Click the "Enhancements" button.
3. Click the "Trim" button.
4. Move the Left and Right Sliders accordingly.
5. Hit Save or Save As.
Hope this helps! Keep liftin'.
Maybe a mod could post the link to A Note about Pulls from the Floor (http://startingstrength.com/resource...tml#post182468) to this forum too? It is on the SSSC sub, but it could really help down here too. Thanks!
Could you please clarify whether the camera should be at eye level or hip height? Thanks.
Originally Posted by Steve Hill
I think I have narrowed down the correct answer to:
- Either heights are acceptable; or
- It's the eye-level of a dwarf.