# Strip Foundation with UIL - Edge In Line with Point of Interest

# Notation and Units

## Metric and Imperial Units

The above formulas may be used with both imperial and metric units. As with all calculations care must be taken to keep consistent units throughout with examples of units which should be adopted listed below:

# Notation

- B = width of foundation, ft or m
- q = load per unit area, kip/ft
^{2}or kN/m^{2} - z = vertical distance from load to point of interest, ft or m
- α = angle of interest, degrees
- ∆σ = stress increase at point of interest, kip/ft
^{2}or kPa