starting strength gym
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: ATG Squatting

  1. #1
    Join Date
    Jul 2007
    Posts
    53

    Default ATG Squatting

    • starting strength seminar december 2024
    • starting strength seminar february 2025
    • starting strength seminar april 2025
    Mark,
    Ass to grass squatting seems to be all the rage these days. There are many people who believe that you teach ATG squatting. Could you comment, please?

    David...

  2. #2
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    54,973

    Default

    Dave:

    Thanks for bringing this up. Squat depth is critically important, but so is correct form. ATG-level depth most usually requires that the lumbar muscles relax the lordosis and that the hamstrings relax before extreme depth can be reached. It doesn't sound like a good idea to me that anything be relaxed in a deep squat, since doing this kills your good controlled rebound out of the bottom and risks your intervertebral discs. Those rare individuals that can obtain ass-to-ankles depth without relaxing anything might be able to get away with it, but as a general rule you should squat as deep as you can with a hard-arched lower back and tight hamstings and adductors. This depth will be below parallel, but it will not usually be "ATG".

    Rip

  3. #3
    Join Date
    Jul 2007
    Posts
    53

    Default

    Thanks for the comments, Rip. I've been preaching against ATG squatting on another forum and have practically been labeled a heretic for doing so.

    I know that you don't teach ATG squatting. I've heard it from you personally and, of course, I've read Starting Strength. The thing is, you don't come right out and say "don't do it" anywhere. Except here! Now I have have something to point at to back up my position.

    Thanks again.

  4. #4
    Join Date
    Aug 2007
    Posts
    69

    Default

    I support you Dave76!

  5. #5
    Join Date
    Jul 2007
    Posts
    62

    Default

    Question for Mark. I've always considered my squat to be ATG, but really, it's more along the lines of what you recommend. I go till my hams are touching my calves and I get that stretch reflex and then blast out of the hole. Problem though is that my lower back will generally flatten out a bit, loosing some of it's arch. What is the problem there, and how do I fix it?

    Thanks.

  6. #6
    Join Date
    Aug 2007
    Posts
    70

    Default

    Quote Originally Posted by Mark Rippetoe View Post
    Dave:

    Thanks for bringing this up. Squat depth is critically important, but so is correct form. ATG-level depth most usually requires that the lumbar muscles relax the lordosis and that the hamstrings relax before extreme depth can be reached. It doesn't sound like a good idea to me that anything be relaxed in a deep squat, since doing this kills your good controlled rebound out of the bottom and risks your intervertebral discs. Those rare individuals that can obtain ass-to-ankles depth without relaxing anything might be able to get away with it, but as a general rule you should squat as deep as you can with a hard-arched lower back and tight hamstings and adductors. This depth will be below parallel, but it will not usually be "ATG".

    Rip
    and most people I've seen can't get below parallel without relaxing something and rounding out their low back so I'm not sure why you're drawing your line in the sand at another place most can't reach under normal circumstances.

    if they can get the flexibility to hit parallel while staying tight, I see no reason that most (not all) can't hit full squtting (ATG is a big of exaggeration and everybody knows it, nobody touches their butt to the floor) without staying tight

    I consider a slightly lumber flexion (not rounding, only flattening) completely safe and normal and see no reason why hamstrings have to relax to hit that depth.

    Lyle

  7. #7
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    54,973

    Default

    Quote Originally Posted by lylemcd View Post
    and most people I've seen can't get below parallel without relaxing something and rounding out their low back so I'm not sure why you're drawing your line in the sand at another place most can't reach under normal circumstances.

    if they can get the flexibility to hit parallel while staying tight, I see no reason that most (not all) can't hit full squtting (ATG is a big of exaggeration and everybody knows it, nobody touches their butt to the floor) without staying tight

    I consider a slightly lumber flexion (not rounding, only flattening) completely safe and normal and see no reason why hamstrings have to relax to hit that depth.

    Lyle
    I see the reason for your comment, the part about "hard-arched". It is sometimes easy to confuse a position cue with an anatomical position. Just had a row with a buddy about this last week, in fact. I don't usually have any problem getting good depth with a decent back position. I agree with you about decent: perfect lordotic extension is not necessary, and that's not my criteria. Decent is safe, and safe need not be perfect. Coaches who insist that perfect flexibility in the hamstrings be present before loading up the squat 1.) will never get much done with novice athletes, and 2.) ignore the value of the loaded squat as a stretch. Sorry for the confusion, and thanks for keeping me honest.

    It has been my experience that most people who have decent hamstring flexibility can get below parallel if their thighs are kept out of the way; the knees should track straight over the toes, the toes should be pointed out at about 30 degrees, and this allows the hips to drop into good depth 90% of the time.

  8. #8
    Join Date
    Jul 2007
    Location
    The South Seas
    Posts
    411

    Default

    I've noticed from looking at my squat vids that I get some serious hip-tuck/back rounding going on at the bottom of my squats, from parallel on down. But it's never once caused me any problems, and feels normal to me. So I've never given it much thought really.

    Here's a good example:

    http://www.strengthmill.com/videocon...video_866_no_0

    I know that, from a technique standpoint, it's not a good thing, but considering it's never really messed with me, I've not bothered doing much to correct it.

  9. #9
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    54,973

    Default

    That's not a terribly offensive squat. The butt-wink Nazis don't like it, but as long as it causes no problems, I'd never yell. I'd like to see a little stiffer lumbar in a novice, but 325 x 5 done easily in a more advanced lifter is not a big deal. "The perfect is the enemy of the good", one of my favorite pithy aphorisms.

  10. #10
    Join Date
    Jul 2007
    Posts
    62

    Default

    starting strength coach development program
    On the subject of the "butt wink", how do you fix it? I've got the same issue with my squats, but I want to do something about it, given that I've had past back issues. If I'm not mistaken, it's cause is weak hip flexors, correct? And the hams overpower the flexors at the bottom? So, if I'm approaching this correctly, the way to fix it is to focus on pushing the knees out and engaging the flexors as much as possible towards the bottom, and an increased emphasis on abdominal/flexor work. Thoughts?

    Also, do your athletes ever struggle with tightness in the lower back? I've been having issues with that for quite some time. What is generally it's cause, and what do you usually do about it? I'm finding that HEAVY abdominal work and a reverse hyper seem to be having a positive impact on it, but wanted to get your opinion. I also have an ortho appointment coming up, but the best sports doc I could find can't see me till October.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •