starting strength gym
Results 1 to 3 of 3

Thread: Suggestions for making new hole in decent thickness leather belt

  1. #1
    Join Date
    May 2015
    Location
    Chicagoland
    Posts
    323

    Default Suggestions for making new hole in decent thickness leather belt

    • starting strength seminar april 2024
    • starting strength seminar jume 2024
    • starting strength seminar august 2024
    Hey folks!

    My son has lost some weight recently, and has run out of holes on his weight belt. I need to make one more, and wanted to ask about advice or helpful videos, etc, before I just jumped right in and started hacking at it. Especially since I don't have the foggiest idea how to even approach it without said advice

  2. #2
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    53,559

    Default

    Measure the hole. Buy a leather punch of that size. Carefully position the punch on the belt on the outside surface. Press down to make a mark in the leather. Remove the punch and see if the hole will be in the right place. Hammer the punch through the leather on a wooden surface you don't mind having a hole-shaped mark in. Punch another one, just in case.

    https://www.amazon.com/JENLEY-Hollow...dp/B07F999CXT/

  3. #3
    Join Date
    May 2015
    Location
    Chicagoland
    Posts
    323

    Default

    Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •