starting strength gym
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Advice on power rack that not bolted to ground

  1. #1
    Join Date
    Jul 2019
    Location
    Atlanta, GA
    Posts
    9

    Default Advice on power rack that not bolted to ground

    • starting strength seminar april 2024
    • starting strength seminar jume 2024
    • starting strength seminar august 2024
    Hi Starting Strength Community,

    I am looking for advice from those that have used a power rack not mounted to the ground or a platform.

    I ideally want a rack that I can:
    - Not bolt down
    - is deep enough to squat inside and warm up bench or press during the rest in the outside
    - is 30” deep enough?
    - less than $1100
    - stable enough to do silly CrossFit kipping from time to time.

    Reason for constraints:
    - moved into Dad’s come to care for him after back surgery. So no bolting to the floor and wall mounted racks only have only one set of uprights
    - cannot build a platform because my dad will trip on the uneven ground. I have horse stall mats cover the garage floor
    - not sure if a 30” inside depth is enough to squat and bench with st the same time. Almost all of the flat foot power racks are 30” deep
    - trying to find a good long term investment

  2. #2
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    53,557

    Default

    I think TSS will make you a 30" deep SS rack if you ask them.

  3. #3
    Join Date
    Jul 2019
    Location
    Atlanta, GA
    Posts
    9

    Default

    Is 30” deep enough to both squat and bench out of the same rack? Thank you

  4. #4
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    53,557

    Default

    It will be, yes. We're changing the SS Gym rack design for this reason.

  5. #5
    Join Date
    Jul 2019
    Location
    Atlanta, GA
    Posts
    9

    Default

    Thanks Rip. Always enjoy your matter of fact style, even if the haters don’t.

  6. #6
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    53,557

    Default

    Fuck those people.

  7. #7
    Join Date
    Jul 2019
    Location
    Atlanta, GA
    Posts
    9

    Default

    Thought I would share the success

    iCloud

  8. #8
    Join Date
    Jan 2018
    Posts
    27

    Default

    Rip - how's the design changing, just making them deeper? Also - I noticed that the hole spacing on the SS racks in recent SS Gym photos appears closer than that in the blue book designs. True?

    To VanillaRed, I use the Rogue R-3. It has a 24" inner depth and is plenty of room for me to squat and bench in. It requires bolting down, so not an option for you, but I'd think you could go for something like the Rogue RML-390F (flat-footed version of the RML-390) which is, I believe, 30" deep inside.

  9. #9
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    53,557

    Default

    The only change will be the 30-inch depth. The holes in the new version are closer than in the book plans.

  10. #10
    Join Date
    Jun 2017
    Posts
    2

    Default

    starting strength coach development program
    Quote Originally Posted by Mark Rippetoe View Post
    The only change will be the 30-inch depth. The holes in the new version are closer than in the book plans.
    Hi Mark,

    I also want a rack that I can squat and bench out of and I also can't have a platform (I don't have room in my apartment).

    I'd like to buy the Starting Strength rack on the TSS website. Before I spend $1K I want to make sure I'm getting this right. Is it the new version that will meet my needs or should I ask TSS to change the depth?

    Thanks,
    David

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •