starting strength gym
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 33

Thread: Good Bumper Plates?

  1. #21
    Join Date
    May 2008
    Posts
    346

    Default

    • starting strength seminar december 2024
    • starting strength seminar february 2025
    • starting strength seminar april 2025
    Why would you need bumpers for deadlifts? It looks cool, but there's few cases where rubber is better than iron for deads.

  2. #22
    Join Date
    Mar 2008
    Posts
    10,378

    Default

    I don't really care what he is wearing to work out, it does not excuse sloppy form.
    I would argue that he is not doing anything wildly different from what Steph describes as a correct drop. His hands don't leave the bar until it is close to waist height and the bar impacts the floor pretty close to evenly. He's not exactly guiding the bar gently to the floor, but he is not actively throwing it down either. The problem comes when the bar bounces again. This is a product of the light weight on the bar and the bouncy plates. I still think that if you drop the bar the same way with 80 kg on there that it would probably look okay and not bounce all over the place like that.

  3. #23
    Join Date
    Nov 2009
    Location
    Texas
    Posts
    3,229

    Default

    You'd be wrong.

    And you don't drop weights this light. Unless you're 6.

    s.

  4. #24
    Join Date
    May 2008
    Location
    Mid-Atlantic
    Posts
    1,623

    Default

    Quote Originally Posted by jacob cloud View Post
    Why would you need bumpers for deadlifts? It looks cool, but there's few cases where rubber is better than iron for deads.
    but is it any worse? I say this because I intend to buy all bumpers (save for 10s, 5s, and 2.5s) to cut costs and save space. Since I do powercleans, and also plan to do the snatch and the olympic lifts, bumpers are the only real option there. I can't see any disadvantages to preforming the slow lifts with bumpers, unless size gets to be an issue, in which case I'll gladly buy a few iron plates once I get strong enough.

  5. #25
    Join Date
    May 2008
    Posts
    346

    Default

    Size is the main problem, yes. If you've ever tried squatting or deadlifting with over 450, it gets ridiculous. I wouldn't waste money on anything but a couple pairs of 45lb/20kg bumpers, personally. Everything else can be done with iron for an adult male.

  6. #26
    Join Date
    Mar 2008
    Posts
    10,378

    Default

    Quote Originally Posted by stef View Post
    You'd be wrong.

    And you don't drop weights this light. Unless you're 6.

    s.
    Point taken.

  7. #27
    Join Date
    Apr 2008
    Posts
    285

    Default

    Quote Originally Posted by TomC View Post
    I would argue that he is not doing anything wildly different from what Steph describes as a correct drop. His hands don't leave the bar until it is close to waist height and the bar impacts the floor pretty close to evenly. He's not exactly guiding the bar gently to the floor, but he is not actively throwing it down either. The problem comes when the bar bounces again. This is a product of the light weight on the bar and the bouncy plates. I still think that if you drop the bar the same way with 80 kg on there that it would probably look okay and not bounce all over the place like that.
    If you look at the youtube video of Mr. Fireman at 57 sec. or so, I see someone basically let the bar go at around shoulder height, with the bar bouncing all over the place. His hands may still be touching the bar, but there is no evidence of him controlling the bar on the descent, and he actually looks like he is throwing the bar down.
    Now, contrast this to some of the videos on the crossfit website that show proper technique

    http://www.crossfit.com/cf-info/excercise.html

    I've looked at a few, but lets choose the jerk and clean & jerk (you'll have to click on them individually as they are wmv. The girl has complete control all the way to the ground. The bar still bounces somewhat, but not 3 feet off of the ground. Do you not see the difference?
    Last edited by gman; 01-04-2010 at 04:49 PM.

  8. #28
    Join Date
    May 2008
    Location
    Mid-Atlantic
    Posts
    1,623

    Default

    Quote Originally Posted by jacob cloud View Post
    Size is the main problem, yes. If you've ever tried squatting or deadlifting with over 450, it gets ridiculous. I wouldn't waste money on anything but a couple pairs of 45lb/20kg bumpers, personally. Everything else can be done with iron for an adult male.
    I think sizes on bumpers vary widely, because I've seen pictures of a bar loaded with maybe 300lbs and was almost full. At the gym I lift at, they have nice Ivanko bumpers that aren't overly bulky. But I think you make a good point and I might reconsider. Iron is also cheaper, so that's nice. I suppose I can always load a 405lb deadlift with 2 bumpers and 2 irons.

    That's legal right? :P

  9. #29
    Join Date
    Sep 2008
    Posts
    1,040

    Default

    Again, unless you are planning on spending a signifigant amount of time on the OLY lifts - Iron is the way to go. I feel like I wasted cash buying my bumpers when I could have bought a cage, Iron, a good bar, and a good belt w/ the same money.

  10. #30
    Join Date
    Jul 2008
    Posts
    301

    Default

    starting strength coach development program
    I prefer bumpers for deadlifts because when I drop 435 pounds of steel plates my wife screams like a banshee.

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •