2017 Microplates for Sale

[Dan Miller]

I'm restarting my "Microplates for Sale" thread with a more current start date and working photo links. You can find the old thread with many referrals here: Microplates for Salel

I have been laser cutting a set of fractional plates for lifters in this forum for about 5-6 years and hundreds of sets sold. Each set contains 2 each of the following weights:

0.25 lb
0.5 lb
0.75 lb
1 lb
(for increasing in 0.5 lb increments between 0-5lbs)

AND

0.625 lb
1.25 lb
(for increasing in 1.25 lb increments - 1.25, 2.5, 3.75)

I have an album with photos of the weights located here: Fractional Plate Set

The easiest/preferred method of payment is on PayPal. Send $36 to dwm81781@yahoo.com on PayPal with your mailing address in the comments. I usually ship within a week, and they go in USPS Small Flat Rate boxes. Those are delivered priority mail within 2-3 days in the US. International shipping is available but almost always way too expensive. Cash or check by mail works also, just email/PM me for my mailing address.

Thanks!
Dan

[Bill Puckett]

I'm restarting my "Microplates for Sale" thread with a more current start date and working photo links. You can find the old thread with many referrals here: Microplates for Salel

I have been laser cutting a set of fractional plates for lifters in this forum for about 5-6 years and hundreds of sets sold. Each set contains 2 each of the following weights:

0.25 lb
0.5 lb
0.75 lb
1 lb
(for increasing in 0.5 lb increments between 0-5lbs)

AND

0.625 lb
1.25 lb
(for increasing in 1.25 lb increments - 1.25, 2.5, 3.75)

I have an album with photos of the weights located here: Fractional Plate Set

The easiest/preferred method of payment is on PayPal. Send $36 to dwm81781@yahoo.com on PayPal with your mailing address in the comments. I usually ship within a week, and they go in USPS Small Flat Rate boxes. Those are delivered priority mail within 2-3 days in the US. International shipping is available but almost always way too expensive. Cash or check by mail works also, just email/PM me for my mailing address.

Thanks!
Dan

I'm a recent (two weeks ago) happy customer. Delivered as advertised.

[Ryan3000]

Also a recent happy customer, and strongly recommend these if you are in the market. I hope I won't need them for a while, but for my wife they are the only way she's making progress on the press.

[vav]

^ same here. Received them Monday, used the 1 1/4 lbs Tuesday. Highly recommended

[Hekktor]

Also a recent happy customer, and strongly recommend these if you are in the market. I hope I won't need them for a while, but for my wife they are the only way she's making progress on the press.

Ditto.

[John Weaver]

My daughter still brings up my 'friend' Dan Miller who sent me the really heavy package that she had to carry in from the mailbox.

I'm another satisfied customer.

[JLB105]

I'm in. Just ordered today. I currently have (from a company no longer around called PDA) some 0.5lb and 0.25lb micoplates. Couldn't pass up this set especially for the money.

[MarinePMI]

Ordered a set last week. Anxiously awaiting delivery.

[bladeofanduril]

Just sent in my order/payment. Looking forward to getting these! For now they will help even out the weight of my craptastic CAP "45lb" plates. Before to long they'll be needed for Press.

[Dan Miller]

I want to thank Matt Reynolds and Shane Hambrick with the Barbell Logic podcast. They mentioned my product on air a couple times and brought it to many of yours attention. I received many orders and ran out of the 1lb and 1.25lb plates. I'm catching up and took a trip to the post office today. Shipped all orders up to and including 9/29. On Tuesday I'll be up to 10/2. Then it will be about a week until I have more plates cut and can resume shipping.

Some FAQ from previous threads:

Plates are shot-blasted and sprayed with a light coat of WD-40 oil to prevent rust. You can keep them like that, with another squirt of oil a couple times per year. If you'd rather paint them, wash the oil off first with hot soapy water.

I usually don't sell partial sets, because I cut equal numbers of each weight. I will though if asked, but it's usually most economical to order a complete set.

If you lose a plate or two I'll replace them for a very reasonable price (shipping plus a few bucks).

I don't make metric weights yet but I've been meaning to start. I'll post when I get my first batch made.