starting strength gym
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: NLP DL warm-ups

  1. #1
    Join Date
    May 2024
    Location
    L.A.
    Posts
    18

    Default NLP DL warm-ups

    • starting strength seminar december 2024
    • starting strength seminar february 2025
    • starting strength seminar april 2025
    I've tried various crap around the garage to set my bar on for NLP Dead Lift warm up sets and as you probably know, nothing is working very well after the first rep. What do serious people use that works well? I have tools.
    Thanks,
    Jeff

  2. #2
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    54,844

    Default

    Quote Originally Posted by Jeff Hazeltine View Post
    crap around the garage to set my bar on for NLP Dead Lift warm up sets
    The platform?

  3. #3
    Join Date
    Apr 2023
    Posts
    718

    Default

    The only thing I can think is that you are talking about loading the bar with less than 135 pounds, and in the absence of bumper plates.

    It doesn't matter. Pulling from a slight "deficit" for a couple warmup sets isn't going to affect anything. When using the empty bar, you can kind of do a deep RDL (holding the bar at the spot on the shins where the plates would put it) if you want. Your weights will soon get heavy enough that this doesn't matter.

    If you're power cleaning, and you should be, you'll need a set of bumper plates.

  4. #4
    Join Date
    Jun 2015
    Location
    Garage of GainzZz
    Posts
    3,406

    Default

    Quote Originally Posted by Jeff Hazeltine View Post
    I've tried various crap around the garage to set my bar on for NLP Dead Lift warm up sets and as you probably know, nothing is working very well after the first rep. What do serious people use that works well? I have tools.
    Thanks,
    Jeff
    Are you warming up the deadlift with an empty bar?

    If so, don’t.

  5. #5
    Join Date
    Mar 2023
    Location
    The Netherlands
    Posts
    59

    Default

    You can just use a stack of plates. That's what I did in the beginning.
    The weights are light enough that you should be able to lower under full control, so you can make the plate land on the same spot (the hole that hangs off the bar) every time so that it won't roll off.

  6. #6
    Join Date
    Jan 2023
    Posts
    324

    Default

    I want to see a video of the lawn mower being used for 45 lb rack pulls.

  7. #7
    Join Date
    Dec 2021
    Posts
    938

    Default

    On the NLP, you're always coming to the DL after 3 work sets of squats and three work sets of a pressing motion. You are already very well warmed up overall at that point, so the DL warmups don't need to start with an empty bar and be as protracted as your squat warmups were. What are you working up to for your one work set of the deadlift, Jeff?

  8. #8
    Join Date
    May 2024
    Location
    L.A.
    Posts
    18

    Default

    My warmups start with an empty bar and I’m reviewing video of every set to monitor my form in an attempt to postpone the next back tweak. While I looked forward to a response to my query, I cobbled together a couple of wooden disks. This will let me go through the motions starting with the setup for each rep.

  9. #9
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    54,844

    Default

    What is your 5RM deadlift now?

  10. #10
    Join Date
    May 2024
    Location
    L.A.
    Posts
    18

    Default

    starting strength coach development program
    53.5 kg.

    I am progressing slowly but I'm ok with that as long as I progress.

    I started SS mid May. Tweaked my back with DL 52.5.
    Did RDL 50 kg. for 4 sessions and then back to DL for 6 sessions (interrupted by a visit with family in TX) and got up to DL 53.5 when I tweaked my back Squatting last week.
    I now have fractional plates and I started 72 hr. recovery periods.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •