starting strength gym
Results 1 to 7 of 7

Thread: Making a good stovetop burger

  1. #1
    Join Date
    Aug 2012
    Location
    New York
    Posts
    2,060

    Default Making a good stovetop burger

    • starting strength seminar december 2024
    • starting strength seminar february 2025
    • starting strength seminar april 2025
    I'm searching for some tips for making a delicious burger on the stove instead of on the grill. We're talking iron skillet or something similar.

    I'm open to all advice, from burger meat to bun to condiments to preparation to cooking method.

    Thanks for sharing,

  2. #2
    Join Date
    Aug 2013
    Location
    Phoenix, AZ
    Posts
    4,738

    Default

    Can't go wrong with a cast iron skillet. I've made mine that way on occasion. Pretty good.

  3. #3
    Join Date
    Aug 2024
    Posts
    26

    Default

    I make 200g burgers on top of a griddle that goes on top of the stove. Just meat salt and pepper. Grill about three minutes each side at max stove temperature and done.

    The cuts here are a bit different than the US, but from what I googled the meat cut I use is lean beef knuckle. You can add bacon for a bit more fat.

  4. #4
    Join Date
    Dec 2021
    Posts
    929

    Default

    I regularly eat burgers made from ground goat. I have a friend from whom I get the animals, processed locally. The taste from does and wethers isn't very strong, and so isn't much different from beef. The meat is rather lean, too.

    I pan fry them - the big secret I've found is making sure the pan is good and hot before adding the meat. Water droplets should skip around on the surface, not stick, and don't try to flip it until it's not sticking at all. I season with salt and maybe pepper, or with a jar of Lion's Choice seasoning my mother-in-law gave me because I like eating there when we visit the St. Louis area.

    I toast the buns in the pan, too, in what little grease there is. They're good enough like that that I often don't add anything else.

    A soft-fried egg goes really well on them, too.

  5. #5
    Join Date
    Aug 2013
    Location
    Phoenix, AZ
    Posts
    4,738

    Default

    I've been partial to bison lately. Good stuff.

  6. #6
    Join Date
    Jan 2020
    Posts
    48

    Default

    If you use cast iron, make sure it's really hot before you lay down the patty. Many people don't wait long enough, and then it sticks. You don't need to use butter nor oil if the cast iron is hot enough.

    It's not against the law to cover it while cooking. Less grease splatter.

  7. #7
    Join Date
    Aug 2013
    Location
    Phoenix, AZ
    Posts
    4,738

    Default

    starting strength coach development program
    I had not considered that. I just put it on low heat to avoid sticking and that worked but made everything take forever. I'll try it that way.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •