starting strength gym
Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Graphs from Five Years of SS/PP-style Strength Training

  1. #1
    Join Date
    Sep 2012
    Location
    California
    Posts
    438

    Default Graphs from Five Years of SS/PP-style Strength Training

    • starting strength seminar december 2024
    • starting strength seminar february 2025
    • starting strength seminar april 2025
    I finished entering all my training logs from the last 5 years into the computer.

    It gave some graphs, which I thought might be interesting to you all since I've been following the advice in Practical Programming for much of it and visualizations are cool.

    The red line follows the max calculated Epley 1RM (weight + weight*reps/30) over the week, mentioned by Meshuggah in another thread. The little green Xs are the Epley calculations for each individual day.

    Training history is roughly:
    • Starting Strength-style linear ramp until 345x5x3, in 10/2011 with some resets and injury. I didn't do the power cleans. GOMAD for the first few months. After that I drank about half a gallon of milk a day for the next few years.
    • Texas Method from that point on until mid-2013 with many resets and injuries. I cut out deadlifts entirely because I had not at that point figured out how to integrate them well. They went up regardless.
    • A Smolov base cycle before a meet in mid-2013. You will notice that although I got a PR, it's lost in noise and effectively accomplished nothing despite being extremely difficult.
    • Advanced Pyramid from PPST3 from 2014 through 2015, with various degrees of success and injury.
    • RTS-style training since 2015, which only had a major effect on bench.

    I thought it might be interesting to look at the rate of progression, because although SS talks about logarithmic increase until genetic potential, I've never actually seen someone's training history made to fit that. So here it is!

    One last note is that you'll see that bench starts off looking logarithmic, but then picks up steam in the middle. This happened when I largely swapped out press volume for bench volume. Bench for me seems to respond very well to high-volume high-frequency.

    Hopefully you find this interesting.






  2. #2
    Join Date
    Dec 2014
    Location
    Brisbane, Australia
    Posts
    2,001

    Default

    That is beautiful! Now do the Wilks and graph 'em!

  3. #3
    Join Date
    Jan 2010
    Location
    San Diego, CA
    Posts
    7,102

    Default

    That's some serious dedication. Thanks for sharing.

  4. #4
    Join Date
    Jul 2014
    Posts
    576

    Default

    This is fantastic Sean. Any chance that you could share your source data (i.e. csv)? I'd love to play with some regressions.

    I imagine the downwards spikes while you were doing Texas method are artifacts of the Epley 1RM projection from volume day vs. intensity day.

  5. #5
    Join Date
    Sep 2012
    Location
    California
    Posts
    438

    Default

    Quote Originally Posted by Toasterleavings View Post
    That is beautiful! Now do the Wilks and graph 'em!
    Good idea! Bodyweight wasn't recorded every training day, but I could do an approximation using the surrounding data.

    Quote Originally Posted by Coconut Chris View Post
    This is fantastic Sean. Any chance that you could share your source data (i.e. csv)? I'd love to play with some regressions.
    Oh, sure! The entire project is available in source form here: GitHub - sstangl/exlog: Personal strength training log and analytics.. If you're on Linux, you should be able to type "make", and it will build the CSV files and generate graphs from them.

    If you for whatever reason want to look at the training log, it is the file "exlog", also viewable online here: https://raw.githubusercontent.com/ss...g/master/exlog. It has comments and stuff.

    The CSV files are auto-generated for the project, but I uploaded the squat daily one here: http://people.mozilla.org/~sstangl/squat-daily.csv. The first few lines are commands for the graph generation program, but they also explain what the columns mean.

    I imagine the downwards spikes while you were doing Texas method are artifacts of the Epley 1RM projection from volume day vs. intensity day.
    Maybe. I reset a lot and tried a bunch of different things to get un-stuck. (The thing that wound up working was heavy singles in place of 5RM.)

  6. #6
    Join Date
    Jul 2013
    Location
    Dallas, GA
    Posts
    4,111

    Default

    That's pretty sweet!

  7. #7
    Join Date
    Oct 2011
    Location
    South Florida
    Posts
    825

    Default

    Cool - thanks for sharing.

  8. #8
    Join Date
    Apr 2015
    Posts
    1,995

    Default

    Excellent!

  9. #9
    Join Date
    Aug 2015
    Location
    Hampton Roads
    Posts
    275

    Default

    Dude, the way your bench breaks out after 250lb is really inspiring me. I dicked around with little direction for a year and was pretty happy with my "Gainzzz." Then I discovered PP and SS (in that order) and I've been pleased with the results but have the nagging fear in the back of my mind that if I ever do get to 2 plates working weight (Next week will be my first attempt doing 200lb for reps) I'll plateau out and should be happy with that. Fuck settling, I want a graph like that!

    What is your height? Age?

  10. #10
    Join Date
    Jul 2015
    Location
    the Island of Misfit Toys
    Posts
    1,036

    Default

    starting strength coach development program
    That is truly impressive. Both the recording and the progress.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •