starting strength gym
Results 1 to 10 of 10

Thread: racking accuracy for the Power Clean?

  1. #1
    Join Date
    Jan 2010
    Posts
    12

    Default racking accuracy for the Power Clean?

    • starting strength seminar december 2024
    • starting strength seminar february 2025
    • starting strength seminar april 2025
    Good evening Rip, I've been trying to find the correct area (on my shoulders) that the bar should rack on with the clean. For some reason it hits my clavicles more than it seems like it should as well as tagging my throat sometimes.(fairly uncomfortable) I've never been able to perform front squats for this same reason. I'm sure the answer is obvious but I'm missing it, your input is much appreciated. Thanks.
    Last edited by Mark Rippetoe; 02-12-2010 at 09:40 PM.

  2. #2
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    55,020

    Default

    Raise your elbows up, so that the bar can sit on your delts.

  3. #3
    Join Date
    Apr 2008
    Posts
    2,968

    Default

    The power clean is the strongest of all of my lifts and I still miss the "perfect" rack position sometimes... I miss it most often as I approach my limiting weights. Rip's right that high elbows make a good rack more likely, but imo it would be very useful to see a video of it. Or, at the very least, to know how much you're lifting.

    The reason I say that is that you could be performing the lift incorrectly (and there are almost innumerable ways to do that, and I've done them all) or you could just lack the flexibility to rack properly period.

    The idea that high elbows makes a good delt rack is 100% right, but it assumes that most everything else is going right before that; I would always gamble on the longer list of techniques containing the flaw that makes the result manky.

  4. #4
    Join Date
    Jan 2010
    Posts
    12

    Default

    Sir, at the risk of being a nuisance, I have made sure my elbows are up and pointing forward, if I push them higher it rolls the bar more into my throat. I will continue to experiment with positioning though, thanks for your help!

  5. #5
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    55,020

    Default

    What is your bodyweight?

  6. #6
    Join Date
    Jan 2010
    Posts
    12

    Default

    168lbs. at 5' 10". I'm not huge by any means, considered fairly thin.

  7. #7
    Join Date
    Jun 2008
    Location
    Wichita Falls, TX
    Posts
    350

    Default

    Could be a grip issue. Probably needs to be wider.

  8. #8
    Join Date
    Jul 2007
    Location
    North Texas
    Posts
    55,020

    Default

    Probably a deltoid mass issue. Grow and see what happens.

  9. #9
    Join Date
    Dec 2008
    Posts
    9

    Default

    I found that elbows up and in helped my rack position more than elbows up alone. Seemed to bring my delts further forward for the bar to rest on.

  10. #10
    Join Date
    Jan 2010
    Posts
    12

    Default

    starting strength coach development program
    Yes lint, I have to agree with you, I just tried experimenting with that yesterday and it does make a difference. Very cool, thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •