starting strength gym
Page 2 of 16 FirstFirst 123412 ... LastLast
Results 11 to 20 of 153

Thread: Chad's Log

  1. #11
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    • starting strength seminar december 2024
    • starting strength seminar february 2025
    • starting strength seminar april 2025
    1/17/13
    volume:
    bench: 235x3x5
    squat: 330x3x5
    lte's: 30 lb ez curl plus 80x8x3
    rdl's: 205x5x3
    neck harness: 35x25,25,20,20

    today
    assistance:
    power cleans: 205x1, 215x0, 185x5x3 (might just do speed deadlifts)
    pullups: bw 12,11,10

  2. #12
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    1/19/13
    Recovery:
    Press: 150x3x6
    Squat: 250x3x3
    DB Hammer Curl: 60x7, 55x7, 45x15

    Today:
    Intensity:
    Bench: 260x1x3
    Squat: 370x3 PR
    Deadlift: 445x3 PR
    Pullups: BW+25x5 (ran out of time to do more sets)

    I will reset bench intensity day to 250 and hopefully get 5 and then move back up 2.5 lbs a week.
    Last edited by ChadTheMeatBeast; 01-26-2013 at 10:49 PM.

  3. #13
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    1/24
    Volume:
    Bench: 225x3x5
    Squat: 335x3x5
    RDL: 210x5x3

    I didn't feel recovered. It could partially be because I switched back to very low carb and my body isn't adjusted.

    Today:
    Assistance:
    Stand on band speed deadlifts: 275x1x8 on the minute (57 percent of estimated 1RM)
    Chins BWx12,11,10
    Neck Harness 35x25x3,18
    Last edited by ChadTheMeatBeast; 01-26-2013 at 10:46 PM.

  4. #14
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    Recovery:
    Press: 152.5x3x6 125x5
    Squat: 250x3x3
    DB Hammer Curl: 60x8, 55x8, 45x16

  5. #15
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    Intensity:
    Bench: 250x3x2 (Dropped 10 lbs from last week hoping to get 5 reps. Will have to drop more weight. Unless I come up with a different idea.)
    Squat: 375x1x5 PR (Might turn this weight into doubles next week, instead of adding weight)
    Deadlift: 450x3 PR (Felt easier than 445/440/435. I don't know if it was the speed deads, but it's good. It might also be that I changed my form. The weight ties an all-time PR, which was done before I broke my arm. But, I only did it for a single back then.)
    Chins: BW+32.5x5,3,3
    Last edited by ChadTheMeatBeast; 02-24-2013 at 05:30 PM.

  6. #16
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    1/21/13
    Volume
    Bench: 215x5x5 (Dropped intensity, raised volume. Will re-try 250 on ID to see difference.)
    Squat: 335x3, 320x5x3 (Similar idea as bench)
    RDL: 215x5x3
    T-bar: 115x8x3
    LTE: 30lb ez-curl + 82.5x8,6,7
    Neck Harness: 35x25x4

    Today
    Assistance
    Stand on band speed deadlifts: 275x1x10 on the minute
    Pullups: bwx8
    Felt like shit and left like a bitch instead of doing 2 more sets of pullups. I think I was dehydrated and didn't eat enough last night after volume day. Have never felt like this.

  7. #17
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    Recovery:
    Press: 155x3x6, 115x7
    Squat: 245x3x2
    DB Hammer Curl: 60x9, 55x9, 45x14

    I started using Fitday and made sure I hit a caloric target. I also drank a lot of water. I felt great today.

    I'm starting to deal with a tweak in my left posterior shoulder and my left elbow. I need to do some soft-tissue stuff on that. Also, I need be stricter on my press form (that's why I have shoulder pain) and on my squat grip (that's why my elbow hurts).
    Last edited by ChadTheMeatBeast; 02-02-2013 at 03:14 PM.

  8. #18
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    Intensity Day:
    Bench: 250x3, 240x4 (I reduced intensity on volume day, but upped tonnage moved. This resulted in an improvement @ 250, but I decided I need to move a weight for 5 to keep long-term progress going. Hence, I dropped to 240. I would have got 5 if not for the previous set, so this was good.)
    Squat: 375x3 PR
    Deadlift: 455x3 PR
    Pullups: BW+25x5x3
    Neck Harness: 37.5x25x4

  9. #19
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    Volume:
    Bench: 215x5x5 (I go too slow on the descent.)
    Squat: 340x3, 325x5x3
    RDL: 215x5x3
    Tbar row: 125x8x3

  10. #20
    Join Date
    Mar 2010
    Location
    Hillsborough, NJ
    Posts
    1,590

    Default

    starting strength coach development program
    Assistance:
    Stand-on-band deadlifts: 275x1x10 on the minute (felt more explosive)
    Chins: complete 40 bw reps: 12,10,7,7,4
    HIIT row 20s rest 100 s x2 (rower is broken, switch to stationary bike)
    bike 20s rest 100s x5
    Last edited by ChadTheMeatBeast; 02-24-2013 at 05:28 PM.

Page 2 of 16 FirstFirst 123412 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •